NDT Level III
1.Selection of right nondestructive testing method/s and techniques suitable for the application
2.Selection of suitable equipment for specific purpose
3.Preparation of NDT inspection procedures for various inspection methods, clients and jobs
4.Preparation and review of procedures based on International, National or in-house Codes, Standards and specifications to meet customer requirements
5.Preparation of written practices as per ASNT recommended practice SNT-TC-1A
6.Review of all inspection procedures
7.Training and certification of personnel as per employer’s written practice
8.Selecting appropriate candidates for recruitment as Trainees, NDT Level I & II to fill job vacancies in NDT, material testing, welding inspection and other quality control related posts
NDT Training
- Ultrasonic Inspection
- Ultrasonic Thickness Gauging
- Advance UT
- Industrial Radiography
- Radiation Safety
- Eddy Current
- Magnetic Particles
- Penetrant Testing
- Visual inspection
Advanced NDT Training
- PAUT
- TOFD
- AUT
- DRT
- CRT
- ECT
- IRIS
- MFL
- RFT
- IR
Welding Inspector Training
- International Preparatory Courses
- AWS-CSWIP Bridging
- AWS-CWI Preparatory
- BGAS – CSWIP GRADE II
- CSWIP 3.1 Preparatory
- CSWIP 3.2.1 ,3.2.2Preparatory
CSWIP 3.2.1 PREPARATORY, CSWIP 3.2.2 PREPARATORY
CSWIP 3.2 is a senior welding inspector certification course. CSWIP Certification schemes are UKAS/Accredited to ISO/IEC 17024, the international standard for personal certification. The certification scheme for personnel (CSWIP) is a comprehensive scheme which provides for the examination and certification of individuals seeking to demonstrate knowledge and competence in their field of operation. The scope of CSWIP includes, among others, welding inspectors, welding supervisors, welding instructors, plant inspectors, under water inspectors, welders and NDT personals.
CSWIP is managed by the certification management board which acts as the governing board for certification in keeping with the requirements of the industries served by the scheme. The certification management board is UK based. All CSWIP boards and committees comprise member representatives of relevant industrial and other interest.
Whom Should Attend the Course?
- This course is suitable for experienced welding inspectors and quality control staffs
- Certified welding inspector for a minimum 2 years’ experience
- 5 years authenticated experience related to the welding inspection duties
- Above candidates must have a valid CSWIP Level 2(3.1) certification
Subjects
- Duties of the senior welding inspector
- Terms and definitions
- Planning
- Codes and standards
- Calibration Of Welding Equipment
- Destructive testing
- Heat treatment
- Wps And Welder Qualifications
- Material Inspection
- Residual Stress And Distortion
- Weldability Of Steels
- Weld fractures
Our Specialities
- PRACTICALS+QUESTION/ANSWERS
- MACRO PRACTICALS
- SPECIAL NOTES ON POSSIBLE OUT SIDE QUESTIONS AND SEVERAL MOCK TESTS
- WE ARE COMMITED TO GIVE YOU HIGH QUALITY SENIOR INSPECTOR COURSE
The Examination Format
Candidates who do not already hold a welding inspection certificate must also complete the full welding inspector (level2) examination in addition to the procedures out lined below
THEORY PART C3(1)
Specific welding technology (including audit question:4 questions from 6 time:1 hour 15 minutes.
THEORY PART C3 PART(2)
General welding theory, product technology and ndt,30 multiple choice questions, time allowed 45 minutes.
PRACTICAL PART A3(1)
Scrutinize and comment on three inspection related documents; time allowed 1 hour.
PRACTICAL PART B3
Examination of weld failures. Time allowed 1 hour.
PRACTICAL PART C3
Scrutiny and interpretation of a fabrication drawing. Time allowed 1 hour.
PASS MARK FOR ALL IS 70%.
RADIOGRAPHIC INTERPRETATION-SUPPLEMENTARY.
EXAMINATION FORMAT: THEORY PART D3
Standard radiographic interpretation theory, nature and properties of x and gamma rays, photographic aspects, fundamental aspects of radiographic quality, geometry of image formation, interpretation, 20 multi choice question time 30 minutes.
PRACTICAL PART D3
Radiographic interpretation in a number of radiographs.
Employment Opportunities
Graduates may find employment as a certified QA/QC Certified senior Welding Inspector, Senior Welding Instructorand Senior Welding Engineer.
Painting Inspector Training
BGAS – CSWIP GRADE II,BGAS – CSWIP GRADE I
BGAS is an International Certification scheme for painting inspectors. In this course contents corrosion, specified coating conditions, surface preparation methods and standards. This BGAS certification approval is very useful to inspectors as it can extend their working capability on pipeline projects. This certification can lead you to a career that is engaging and promising on all levels.
Whom Should Attend the Course?
- Candidates with or without experience in the painting inspection industry
- Suitable for individuals engaged in the inspection and coating of new and existing pipe lines
Subjects
- Corrosion
- Surface Preparation Methods And Standards
- Surface Contaminants And Tests For Detection
- Paint Constituents And Basic Technology
- Solutions And Dispersions
- Drying And Curing Of Paint Films
- Paint Systems
- Water Borne Coatings
- Paint Manufacture
- Testing Of Paints For Properties And Performance
- Film Thickness
- Special Coating Conditions
- Cathodic Protection
- Holiday/ Pin Hole Detection
- Paint Application
- Metal Coatings
- Coating Faults And Colour
- Health And Safety
- Duties Of Painting Inspector
- Specifications For Paint Systems And Performance Requirements
Our Specialities
- CLASS TEST ON EVERY TOPIC
- QUESTION BANK OF AROUND THOUSANDS OF QUESTIONS
- PRACTICALS+QUESTION/ANSWERS
- SPECIAL NOTES ON POSSIBLE OUT SIDE QUESTIONS AND SEVERAL MOCK TESTS
Employment Opportunities
Graduates may find employment as a certified QA/QC Certified painting Inspector, coating Instructor. Its depends upon qualifications and experience.
QA/QC MECHANICAL ENGINEERING
AFFINITY TESTING SERVICES is one of the best training institute Kerala ,offering courses in QA/QC. The courses are designed keeping in mind the current requirements. This training course provides in-depth knowledge required for welding and piping inspection professionals including Technicians, Inspectors and Engineers called upon to witness, supervise or conduct visual welding Inspection and Piping Inspection activities. The Practical aspects are emphasized by ensuring the theoretical training is complimented with practical sessions concerning the details of Welding Inspection and Piping Inspections under he guidance of a qualified instructor.
Role played by a QA/QC Engineer
A QA/QC Engineer plays a major role in almost all industry. Their work involves monitoring of products,testing them and ensuring that it meets the specified standards. They have to check the durability of the products and in case of any concern try and find a solution to it. They have to make sure that the production takes place in the proper manner and the quality of the product is maintained. There are a wide variety of opportunities for QA/AC mechanical engineers .There are various techniques that are used to ensure the quality of the products. These techniques help them detect the irregularities at the initial stage thus helping them to find a solution for the same.
This covers the following areas of specialization:
- QA/QC Welding Inspection
- Topics: QC Welding section, NDT , Basic Piping Engineering, Welding Engineering
- QA/QC Piping Inspection
- Topics:QC Piping section, NDT , Piping Engineering and Basic Welding Engineering.
- Diploma in QA/QC Engineering
- Topics: NDT methods,Piping inspection,welding inspection,Basic fire and safety.
Safety Training
- Working at height for supervisors
- Working at height for workers
- Peer rescue assist (Pre-rigged Systems)
- Rope Rescue Awareness (Level 1)
- Confined space rescue awareness (Level 1)
- Integrated rope and confined space rescue
- Interior and exterior firefighting
- Hazmat awareness
Lead Auditor Training
- QMS ISO 9001:2015 Lead Auditor
- ISMS ISO 27001:2013 Lead Auditor
- FSMS ISO 22000:2018 Lead Auditor
- EMS ISO 14001:2015 Lead Auditor
- BCMS ISO 22301:2012 Lead Auditor
- ISO 45001:2018 MIGRATION Lead
Internal Auditor Training
- QMS ISO 9001:2015
- ISMS ISO 27001:2013
- FSMS ISO 22000:2018
- EMS ISO 14001:2015
- ISO 45001:2018 MIGRATION